 |  |  |  |  |
This was made as a halter/lead
rope holder (approx. 26" x 28").
But the dimensions of the back
can be widened allowing more
space between hangers to
accommodate cowboy hats or
jackets. All surfaces are smooth
and no visible welds on top
surfaces to insure no snags on
anything hung.
rope holder (approx. 26" x 28").
But the dimensions of the back
can be widened allowing more
space between hangers to
accommodate cowboy hats or
jackets. All surfaces are smooth
and no visible welds on top
surfaces to insure no snags on
anything hung.
This was made as a halter/lead rope holder
(approx. 26" x 28"). But the dimensions of
the back can be widened allowing more
space between hangers to accommodate
cowboy hats or jackets. All surfaces are
smooth and no visible welds on top surfaces
to insure no snags on anything hung. Any
picture can be used as a silhouette and
there are several options for letters/fonts.
This piece and the one above are only two
examples, your imagination is the limit.
(approx. 26" x 28"). But the dimensions of
the back can be widened allowing more
space between hangers to accommodate
cowboy hats or jackets. All surfaces are
smooth and no visible welds on top surfaces
to insure no snags on anything hung. Any
picture can be used as a silhouette and
there are several options for letters/fonts.
This piece and the one above are only two
examples, your imagination is the limit.
This is a small fabrication table,
primarily used as a metal shaping
platform. Small square attached to
upright is to hold a 2.5 LB mini sledge
hammer. (approx. size 36" tall x 40"
wide). 3" square tubing for legs and
upright, top piece is 1.5" thick.
primarily used as a metal shaping
platform. Small square attached to
upright is to hold a 2.5 LB mini sledge
hammer. (approx. size 36" tall x 40"
wide). 3" square tubing for legs and
upright, top piece is 1.5" thick.
Roadrunner family. Cut using
CNC plasma. Approximate
measurements are 4' long by 22"
tall. Cost varies on size and
finish.
CNC plasma. Approximate
measurements are 4' long by 22"
tall. Cost varies on size and
finish.
In the light, the rust patina really
stands out, giving the metal an
"aged" look. Any photo can be
used to create something from
the plasma cutter.
stands out, giving the metal an
"aged" look. Any photo can be
used to create something from
the plasma cutter.
Horseshoe art for the authentic
western decor. Art/sculptures
can be made with new or used
horseshoes. Salt/Pepper
shakers, benches, book ends,
candle holders, or just about any
idea you can come up with. The
base can be made heavier to
use for book ends or a business
card holder.
western decor. Art/sculptures
can be made with new or used
horseshoes. Salt/Pepper
shakers, benches, book ends,
candle holders, or just about any
idea you can come up with. The
base can be made heavier to
use for book ends or a business
card holder.
Decorative as well as structurally
helpful, these viga/beam collars
add a nice touch. Hand made or
CNC machined to specific
tolerances.
helpful, these viga/beam collars
add a nice touch. Hand made or
CNC machined to specific
tolerances.
If a customer would like these to
be decorative, the flanges can
have a design cut out of them
using the CNC plasma machine
or just the holes drilled for the
bolts.
be decorative, the flanges can
have a design cut out of them
using the CNC plasma machine
or just the holes drilled for the
bolts.
This coat/hat rack was made
using horse shoes for legs and
hooks with 3" pipe for the
upright. Options include amount
of hooks, leg design, and finish.
using horse shoes for legs and
hooks with 3" pipe for the
upright. Options include amount
of hooks, leg design, and finish.
This rose is approximately 26"
tall and 10" wide. All of the
petals are hand made, stem is
1/8" x 4 rod with copper wire
used as decoration.
tall and 10" wide. All of the
petals are hand made, stem is
1/8" x 4 rod with copper wire
used as decoration.
Close up of the above rose. The
finish on this is the bare metal,
but any finish can be used.
finish on this is the bare metal,
but any finish can be used.
This is a smaller version of the
above rose. It is roughly 14" tall
and 5" across. Stem made with
1/8" rod braided together.
above rose. It is roughly 14" tall
and 5" across. Stem made with
1/8" rod braided together.